This is a random collection of videos that I have made or may be in. Some range from good to really crappy. Here are a few to enjoy. Want more added? Let me know I can dig them up on youTube.

This is a fun project that make use of one of the low cost Induction Cookers that are cheep and useful for other things besides cooking.

Using Desitin (Butt Cream) you can make a very good differential gear marking compound. The real stuff is expensive and if you lose the small packet this will work in a tight spot.

Part one of a three part series on how I am going to attempt to build a TIG cooler out a a workbench of parts.

Part 1.5 was really a How To in rebuilding the Procon pump. I had purchased one of the McCann’s carbonators with a bad pump. So this shows how to rebuild one. Useful if you actually use the pump in a carbonator or coffee machine which seems to be their more common use.

This is the final part on the homemade TIG cooler project. This last video shows the cart with the fitted pump and all related parts. The Procon pump is fired up and I do a quick test of the unit.

Me any my pal Wayne did this to showcase the best of SEMA 2015 in Las Vegas! It doesn’t get better than interviewing the Magic Tree from Little Trees car fresheners… or is the Magic Tree interviewing me?

Testing the assembled Sunbeam Tiger’s dash. Shows off the Speedhut gauges and a few other things.

Unboxing of my custom Speedhut gauges for my Sunbeam Tiger Dashboard Project. Shows the gauges then mounted in the Tiger Dash

A very short look at the 2014 Los Angeles Shelby Club Holiday Party 2014. Some Shit talking at the very end if you wait long enough…

Went to Willow Springs with the Alfa club a long while back. here is some video of The Ripper at that event.

VARA Big Bore Bash – Shelby Club Run.

The Ripper get out and loops it on turn one at Willowsprings. This is on the big track and I was carrying some speed as it broke loose. Did the classic jump off the throttle at which point the car snaps. You can see the results in several camera angles at the end of this. Broke the rim, brake hat and rotor. Car caught a ditch and lets say not one of the better days. Nov. 5th, 2011. A picture of the event made it in the year end Vintage Motorsport Magazine. Would be cool if it was someone else 😉

This was back Jan 26th, 2008 after a slight problem with the oil pump while at the race track. I was running with the Speed Ventures Club up at the Big Track at Willow Springs Raceway. While coming into the long straight the car lost the oil pump, and it’s not a good place to be watching gauges. Drove it flat out for about 20 seconds before the rods separated from the crankshaft. This was the first time I rented a transponder, best time for me before the blow up was a 1:41.260 @ 88.880mph.

Second Dyno pull at QMP racing. This is a small block Ford with Edelbrock Victor heads, Super victor intake, Ford Motorsports aluminum block and a few other nice parts.

A while back the ‘Record Scratch’ and commentary videos were going around so I made one for myself. This only has the beginnings of it so don’t expect a full story. Still funny none the less. The original video was with Leigh Koechner who was a lot of fun.