Copyright (C) 2013 - 2017 Sandy Ganz, GTSparkplugs. All Rights Reserved. Content May NOT be used without written permission
PSC Saginaw Pump Housing
This is the rear of the new pump housing. You can see that this is just a round housing with a AN -10 fitting on the top and a rear AN -6 fitting on the rear. No reservoir on top, just a fitting which make the cutting of the stock Ford bracket much less intrusive. Also note that this housing will work with any Saginaw P-Series (metric) Pump so you do not have to purchase the pump from PSC and in fact in my installation I did not use the PSC pump. UPDATE : I changed out the pump and a baffled LEE Power reservoir with baffles and all is well!