Copyright (C) 2013 - 2019 Sandy Ganz, GTSparkplugs. All Rights Reserved. Content May NOT be used without written permission. Use at your own risk
Stock Mustang Crossmember Close View
This is the stock Mustang Crossmember. I bead blasted it then started marking out the areas that needed work. You can see how tall the emergency brake bracket it now. This got into the transmission mount since it was moved back on the crossmember. It looked like it would all work if I could remove it in a way that I could re-weld to the modified bracket. Did I mention that the Mustang emergency brake mechanism is a scary bunch of loose parts! If you do NOT need a emergency brake the job becomes a lot easier...
